Pages

17 December 2014

Dover Priory Signal Box - A bit more detail


There I was, merrily building a signal box for myself, when all of a sudden I found myself offering to build a modern-day signal box for a fellow model rail forum member - he'd pay of course, and provide materials, so off I set.

He sent me a wealth of current photographs as he only lives but 5 minutes away from the prototype, and I had phopgraphs from every angle imaginable, winging their way to me via the internet.

I started of course, with my trusted foamex shell, selecting 2mm thick for the purpose of bracing, and then wrapped this with Embossed brick plasticard (SE Finecast Flemish Bond), and there was the brick base complete. Lintels and cills were added with pieces of foamex, let into channels I'd cut in the plasticard/foamex


To fix on the brick sheet, I used a long piece, cut to the height of the base, and then fixed it in place a side at a time with a PVC weld adhesive used for fixing pipes together. Once one face was stuck, I scored down the back, and folded it around the foamex shell and glued it in place. The sheet finally joined at the back, where I figured the seam wouldn't be too noticeable as the model, when in situ on my customer's layout, will be but an inch or two from the back scene, and not visible unless it's picked up.


Windows were constructed by printing out the window frames onto signwriters vinyl, then sticking the complete unit to a piece of thin clear pvc.

I devised this method when building the signal box for my own layout, which has been put on the back-burner...


This one is a bigger frame, but what I've done is stuck the cut vinyl windows to the pvc, then added styrene strip (40thou x 40thou) around the frames to give it bulk. The whole window unit is then cut out, and affixed to the base, with 2.5mmx2.5mm strips as corner posts.

Unfortunately I didn't take many great interim pictures of the build, but here's a quick ref pic I sent my customer from the dash of my car, whilst I was waiting to go to the Dentist's. Here I've added a roof from foamex, tiled with individual pieces of paper, added guttering and bargeboards, and started on the lean-tos...

The lean-tos were made from plasticard, scored to form planks. I tried some Wills Boarding, but it was just way too thick to deal with.


For the security screens, my customer had got some etches from  Shawplan - a bit big in scale if truth be told, but I figured (and he agreed) that you wouldn't see the mesh at true scale, and for what it was, this was a great representation.

I tried the raw brass versions for size before emailing for approval.

Approved they were, and were given a fine spray with a grey enamel from a Rattlecan

I made up a framework for the door screen from thin styrene strip and glued it to the mesh with Solvent, before spraying the whole thing, and it was then glued in place with some 40thou strip for beams. The lean-to roofing felt, seen here is masking tape fixed on to a piece of 30thou plasticard with the aid of some MEK to help it stick more permanently.

The steps are scratch built from rod and strip, whereas the security fencing is a proprietary product sent up by my customer, as is the barbed wire





The roof was given a coat of grey emulsion, before several washes of black to pick out the individual tiles. A lighter grey dry brush followed to bring out some weathering highlights. Finally some moss and lichen was added by first dabbing spots of green/white and then dabbing pva in along the roof line and down both pitches before adding moss-coloured flock.


The pipework was an absolute bit of indulgent fun, as it will never be seen from its backboard location!


Extra detailing included pipe trunking and a warning sign for the padlocked locking room door - again not seen unless you stick your eye up to the steps...


And finally a demo shot put on to a hastily cobbled together temporary platform to give it a sense of  location

talking of which, just as I'd photographed the model, mu customer posted up a near identical angle of the real thing, so I just had to photoshop it in...


8 comments:

  1. What a superb job and a brilliant post Lee, you've really captured the look of the real thing.

    ReplyDelete
    Replies
    1. Thanks Geoff - it's been quite a long project, but I'm really happy with it

      Delete
  2. That lost photo is seriously impressive. There is no way you'd know it was a model rather than the real thing. I sit in awe!

    ReplyDelete
    Replies
    1. Thanks Mark. It's the most detail I've ever put into a model. I'm just hoping it sits into the gap on my customer's layout correctly...

      Delete
  3. An epic description of a very fine model. Your windows are quite amazing and the whole job is evidence of the fact that you were enjoying yourself, confident in your skills and the materials at hand. It's all very convincing. I wonder why the real thing is locked down like Fort Knox?

    ReplyDelete
    Replies
    1. It seemed a bit of a shame to cover those windows up, but I was actually looking forward to meshing them over - it's those extra bits of detail and realism that lift it from being just a "box" made from plastic into something else. I did have a lot of fun with this one, and I'm going to be sad to see it go, even more so than the bridge.
      I've seen photos of the box from the early 2000s with the windows still "open". I'm not entirely sure when it was locked down - obviously it's unmanned now and there must be local security issues.
      You can see David's excellent (and Epic) thread here, with the early paper print wrapped round Balsa incarnation of the Signal Box.

      Delete
  4. What a fantastic piece of model making. You've made what should be an attractive box look like an absolute dive - brilliant!

    Not sure I'd fancy working there...

    ReplyDelete